mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

AR77.20-P-3000T Remove/Install Sliding/Pop-Up Roof Frame|Page 18845 > < AR77.20-P-3000T Remove/Install Sliding/Pop-Up Roof Frame|Page 18843
Page 1
background image

Sunroof / Moonroof Frame: Service and Repair
AR77.21-P-0800-04T Install Panoramic Roof Frame

AR77.21-P-0800-04T Install Panoramic Roof Frame

- with CODE (413) Panoramic sliding roof
- with CODE (419) Solar module for panoramic roof

Test And Adjustment Values Of Panoramic Roof

Special Tool

Special Tool

Workshop Equipment

1. Lift panoramic roof frame over roof opening with the aid of four helpers and lower slowly.

2.1. Connect electrical connectors for solar module in rear area at bottom of panoramic roof frame.

On vehicles up to 31.5.06 and code (413) Panoramic sliding roof with code (419) Solar module for panoramic glass roof.

3.1. Connect electrical connectors for roof antenna in rear area at bottom of panoramic roof frame.

On vehicles as of 1.6.06 and code (494) USA version. Depending on the equipment, the electrical connector on the roof antenna can be located
on the left or right side of the vehicle or on both sides of the vehicle.If a dummy antenna is installed instead of the roof antenna, the electrical
connector is not required.

AR77.20-P-3000T Remove/Install Sliding/Pop-Up Roof Frame|Page 18845 > < AR77.20-P-3000T Remove/Install Sliding/Pop-Up Roof Frame|Page 18843