E 55 AMG Wagon (211.276) V8-5.5L SC (113.990) (2006)
2
Mark position of rubber bushing (17d) relative to track control arm (17).
To press out rubber bushing
Component Identification
3
Press out rubber mount (17d) using press out/in tool (011, 012).
Push in rubber mount
Component Identification
4
Transfer alignment mark to new rubber bushing (17d).
5
Position chamfer of rubber mount (17d) on chamfer (arrow) of spring control arm (17).
The rubber bushing slot (17d) must align with the linear axis of the track control arm (17).
6
Use press out/in tool (011, 012) to press in the rubber mount (17d) until the collar of the press out/press in tool (011) abuts the spring control arm
(17).
When pressing in make sure that the rubber mount (17d) does not twist or turn.
AR35.20-P-0114-01I Remove/Install Spring Control Arm Rubber Mount
AR35.20-P-0114-01I Remove/install spring control arm rubber mount
Special Tools