mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF27.10-P-0001-04PZ Automatic Transmission (AT), Location of Components, Floor Shift|Page 9657 > < GF27.10-P-0001-04PZ Automatic Transmission (AT), Location of Components, Floor Shift|Page 9655
Page 4
background image

Transmission mode switch (S16/6)

The following transmission modes can be selected:
^

S Sport mode
-

Start-off in 1st gear for all driving situations

^

C Comfort mode
-

Start-off in 2nd gear except in 1st gear range

Gear changes are performed at lower engine speeds.

If kickdown is actuated, the gears are shifted up and down as for transmission mode "S".

^

M Manual shift program
-

direct gear selection using selector lever or left steering wheel gear shifter and right steering wheel gear shifter (up to 31.5.06) or steering
wheel gear shifter MINUS and steering wheel gear shifter PLUS (as of 1.6.06)

GF27.10-P-0001-05RMZ Automatic Transmission (AT), Selector Lever Positions

GF27.10-P-0001-05RMZ Automatic transmission (AT), selector lever positions

- TRANSMISSION 722.6
- 209.376 as of 1.6.03
- 209.476
- 211.076 as of 1.9.03
- 211.276
- 219.376
- 230.474 as of 1.9.03
- 230.479 up to 08

Component Identification

The selector lever can be moved into 6 different positions. The driver can select 3 different transmission modes using the transmission mode switch
(S16/5).

The selector lever positions have the following meanings:
P

Park lock and start position

R Reverse gear
N NEUTRAL

(No power transmission takes place. The vehicle is freely movable.)

D All 5 forward gears are available.

Transmission mode switch (S16/5)

Sport program "S":
^

Starting off in 1st gear for all driving situations.

Comfort program "C":
^

Starting off always in 2nd gear (except in 1st gear range).

GF27.10-P-0001-04PZ Automatic Transmission (AT), Location of Components, Floor Shift|Page 9657 > < GF27.10-P-0001-04PZ Automatic Transmission (AT), Location of Components, Floor Shift|Page 9655