E 55 AMG Wagon (211.276) V8-5.5L SC (113.990) (2006)
Component Identification
Illustrated on model 203.061
Function
The selector lever is moved and positioned in the shift gate, which is not visible to the driver. All the selector lever positions are detected by the
electronic selector lever module control unit (N15/5), coded and transmitted via the Controller Area Network-Bus Class C (engine compartment)
(CAN-C) to the ETC [EGS] control unit (N15/3).
Selector lever positions "P", "R", "N" and "D" are passed on mechanically by means of a shift rod to the range selector lever on the transmission side
in parallel to sending via CAN.
The shift ranges "1", "2", "3" and "4", up to those which the electronic transmission control permits the upshifting of the automatic transmission, can
be shifted via a sideways movement of the selector lever into selector lever position "D" (touch shift).
GF27.60-P-5100NT Location/Task/Design/Function of Floor Shift
GF27.60-P-5100NT Location/task/design/function of floor shift
- TRANSMISSION 722.9
Component Identification