mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Shift Cable, M/T > < Procedures|Page 10341
Page 1
background image

Selector Shaft: Service and Repair

AR26.60-P-0600-02TS Disassemble, assemble center shifter console and shift rod at transmission

- TRANSMISSION 716.6
- Vehicle with single pole circuit

Repair Materials

Shown on transmission 716.654

Component Identification

1

Release lock for bolt (2a) using screwdriver and swivel bolt (2a) up through 90 degrees.

2

Remove bolt (2a) from center shifter console (2).

3

Pull locking pin (3) out of connecting piece (4).

Installation: The locking pin (3) must be replaced because it is bent during removal.

Installation: Apply light coating of grease to pin (2a) and locking pin (3).

4

Remove center shifter console (2) from transmission and shift rod (1) with connecting piece (4) from main shaft.

5

Install in the reverse order.

Shift Cable, M/T > < Procedures|Page 10341