G 550 (463.236) V8-5.5L (273.963) (2009)
/v8-5.5l_(273.963)/Page-238002.png)
Test values for pistons
Cylinder bore diameter identification
1
Assign piston to the cylinder bore
Piston diameters are specified in two tolerances. The piston diameters are differentiated from each other by the identification x or (x). This is
located on the top of the piston crown. Pistons marked with x must only be installed in cylinder bores marked with x.
Pistons marked with x must only be installed in cylinder bores marked with x.
