mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Audio/Navigation Sys. - Volume In AUX Menu Is Too Low|Page 12590 > < Audio/Navigation Sys. - Volume In AUX Menu Is Too Low|Page 12588
Page 3
background image

3

-

"12-key keypad":
-

Alphanumeric input

The video or audio source of the COMAND operating, display and controller unit is selected and operated via the COMAND operating, display and
controller unit.

Video unit detected function sequence

The left rear display, right rear display or DVD player automatically detects that a video unit has been connected via the respective AUX jack.
Based on the data transferred by the video unit, the left rear display generates the analog or digital audio signals and the digital picture signals for the
user interface of the "AUX" menu item on the screen of the left rear display.
Based on the data transferred by the video unit, the right rear display generates the analog or digital audio signals and the digital picture signals for the
user interface of the "AUX" menu item on the screen of the right rear display.
The DVD player generates the analog audio and picture signals for the user interface of the "AUX" menu item on the screen of the respective display
based on data transferred by the video unit.

The menus and submenus of the "AUX" menu item are displayed for the rear passenger(s) on the screen of the respective display (see operating
instructions).
The rear passenger(s) can now perform additional control operations or settings using the above-specified controls on the remote control (see Operating
instructions).
The signals from the above-specified controls on the remote control are transferred via the infrared (IR) interface on the remote control to the respective
display.

Audio unit detected function sequence

The left rear display, right rear display or DVD player automatically detects that an audio unit has been connected via the respective AUX jack.
Based on the data transferred by the audio unit, the left rear display generates the analog or digital audio signals and the digital picture signals for the
user interface of the "AUX" menu item on the screen of the left rear display.
Based on the data transferred by the audio unit, the right rear display generates the analog or digital audio signals and the digital picture signals for the
user interface of the "AUX" menu item on the screen of the right rear display.
The DVD player generates the analog audio and picture signals for the user interface of the "AUX" menu item on the screen of the respective display
based on data transferred by the audio unit.
The menus and submenus of the "AUX" menu item are displayed for the rear passenger(s) on the screen of the respective display (see operating
instructions).
The rear passenger(s) can now perform additional control operations or settings using the above-specified controls on the remote control (see Operating
instructions).
The signals from the above-specified controls on the remote control are transferred via the IR interface on the remote control to the respective display.

Transmission of audio and picture signals function sequence

Upon reception of analog picture signals from the following AUX jacks via the relevant path, the respective display generates the digital picture signals
for the associated screen on the respective display:

-

COMAND video or COMAND audio (COMAND operating, display and controller unit), with code (528) COMAND with DVD changer or with
code (512) COMAND APS with DVD changer):
-

COMAND operating, display and controller unit

-

Y/C line

-

DVD player

-

Y/C line

-

Display AUX (AUX jack of left rear display or AUX jack of right rear display):
-

Direct lines

-

Drive AUX (AUX jack of DVD player):
-

DVD player

-

Y/C line

The generated digital picture signals are output on the screen of the respective display.
Upon reception of analog audio signals from the following AUX jacks via the relevant path, the respective display generates the digital audio signals:

-

COMAND video or COMAND audio (COMAND operating, display and controller unit), with code (528) COMAND with DVD changer or with
code (512) COMAND APS with DVD changer):
-

COMAND operating, display and controller unit

-

Stereo line

-

DVD player

-

Stereo line

Audio/Navigation Sys. - Volume In AUX Menu Is Too Low|Page 12590 > < Audio/Navigation Sys. - Volume In AUX Menu Is Too Low|Page 12588