GL 320 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2009)
Oil Pan: Service and Repair
AH01.45-P-0001-01OM Notes on Sealant Path For Oil Pan
AH01.45-P-0001-01OM Notes on sealant path for oil pan
Repair materials
General information:
^
Sealing surface: free of anticorrosion agent
-
free of machining residues
-
oil and grease-free
-
dust-free
^
The sealing surface must be flat (replace bent components).
^
Line (A) identifies the sealant run.
^
Discontinuity of the sealant bead is not permissible.
^
Do not spread sealing bead.
^
Component temperature: min. +7 degrees C up to a max. of +25 degrees C
^
Sealant temperature: min. +7 degrees C up to a max. of +25 degrees C
^
Maximum assembly time: 7 minutes
^
Sealant bead diameter: 2 mm
^
Nozzle diameter: 1.5 mm
Sealant path for oil pan
Engine 642.910/920