GL 320 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2009)
Component Identification
8
Fit on rivet press tool (5).
Place rivet press tool (5) in such a way that the spacer webs (arrow) lie on the rolls of the riveted link.
9
Tighten pressure screw on rivet press tool (5) until a firm resistance is felt.
While turning the screw ensure that pins of the riveted link are inserted into the holes of the outer plate (8).
10
Take off riveting tool (5).
Component Identification
11
Transfer assembly insert (7) with the digit D5 on the riveted section (arrow).
Component Identification
12
Fit on rivet press tool (5) exactly above the center of the pin (arrow).
Rivet every pin of the riveted link individually.
13
Tighten thrust spindle at riveting tool (5).
14
Take off riveting tool (5).