GL 320 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2009)
3
constant.
4.2
Store the absolute angle at the flange of the rear axle differential (6) in the measuring instrument
If the electronic propeller shaft inclinometer with memory extension is used or the electronic inclination propeller shaft inclinometer with
memory extension is used in articulation angle measuring mode.
Store the measured value by pressing the SAVE button. Afterwards the measurement readiness is displayed for the seventh or first angle.
The absolute angle at the flange of the rear axle differential (6) may only be stored if the sensor (086a) on standby and the displayed value is
constant.
AR41.10-P-0085-06GZ Measure Absolute Angle at the Front Axle Gear Data Sheet For Measuring
Inclination Angle, Form
AR41.10-P-0085-06GZ Measure absolute angle at the front axle gear Data Sheet for Measuring Inclination Angle, Form
Workshop Equipment