GL 320 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2009)
/v6-3.0l_dsl_turbo_(642.820)/Page-3318002.png)
Wear cotton gloves. Ensure that no fingerprints are present in the area of the adhesive surface (area B).
1. Cut triangular opening of cartridge tip so that glue can be applied with a height of approx. 14 mm and a width of approx. 8 mm.
2. Guide cartridge tip along body flange and simultaneously press out glue uniformly.
Completely press out glue not required immediately following application (disposal).
AR67.20-P-2000-09GZ Prepare Body Flange on Rear Window For Installation
AR67.20-P-2000-09GZ Prepare Body Flange On Rear Window For Installation
Commercially Available Tools
Repair Materials
Wear cotton gloves. Ensure that no fingerprints are present in the area of the adhesive surface (area B).
1. Cut glue residues on body flange down to a height of approx. 1 mm to 2 mm.
A maximum of 2 mm of glue residue may be left. Pull off loose adhesive material (remaining pieces which are not completely cut off).
