mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Audio/Navigation Sys. - Volume In AUX Menu Is Too Low|Page 9211 > < Audio/Navigation Sys. - Volume In AUX Menu Is Too Low|Page 9209
Page 1
background image

Auxiliary Input / Output Jack: Description and Operation

GF82.90-P-2004GQ Rear Entertainment AUX Applications, Function

- with CODE (864) Rear entertainment system
- with CODE (866) Preinstallation for rear entertainment system

Function requirements

^

Status "Circuit 30 ON" and active telematics CAN (one vehicle door is opened) for t = 10 min or "Circuit 15R ON"

^

Rear entertainment system is switched on and operating properly

^

Video or audio devices are connected to the AUX jack of the left rear display (A40/5) or right rear display (A40/6) or the AUX jack of the DVD
player (A40/4)

^

COMAND operating, display and controller unit (A40/3), with code (528) COMAND including DVD changer or with code (512) COMAND APS
including DVD changer, is switched on

General

Additional video or audio devices can be connected to the rear entertainment system via the AUX jack of each respective display or via the AUX jack of
the DVD player.
These may be portable DVD players, video cameras, MP3 players or games consoles, for example. No device-specific user interface is prepared by the
left rear display, right rear display or DVD player in the "AUX" menu item for these video or audio devices.
The video or audio devices are operated using the video or audio device itself.
The video or audio device is detected automatically. Depending on whether a unit with video or audio output is detected, the associated screen is
displayed in the "AUX" menu item of the active display.

If a video or audio unit is connected to the AUX jack of the left rear display, the associated screen is displayed in the "AUX" menu item on the activated
left rear display.
If a video or audio unit is connected to the AUX jack of the right rear display, the associated screen is displayed in the "AUX" menu item on the
activated right rear display.
If a video or audio unit is connected to the AUX jack of the DVD player, the associated screen is displayed in the "AUX" menu item on whichever
display is switched on.

On vehicles with code (528) COMAND with DVD changer or with code (512) COMAND APS with DVD changer, the respective video or audio source
of the COMAND operating, display and controller unit can be selected. The corresponding screen is shown on the respective display according to
whether a video or audio source was selected via the COMAND operating, display and controller unit No information on the current application is
displayed (e.g. radio station). The video or audio source of the COMAND operating, display and controller unit is operated via the COMAND operating,
display and controller unit.

When the left rear display is switched on, the "AUX" menu item can only be called up on the left rear display.
When the right rear display is switched on, the "AUX" menu item can only be called up on the right rear display.
When the left rear display and right rear display are switched on, the "AUX" menu item can be called up on both displays. It is only necessary to select
the respective display using the "Roller" control on the remote control when the "AUX" menu item is operated via the remote control.

The "Rear entertainment AUX applications" function consists of the following subfunctions:

^

Video unit detected function sequence

^

Audio unit detected function sequence

^

Transmission of audio and picture signals function sequence

Operating instruction

Video or audio output is performed automatically.
When a video unit or source of the COMAND operating, display and controller unit, with code (528) COMAND with DVD changer or with code (512)
COMAND APS with DVD changer is detected, a scaled down video picture is displayed in the application field and the "AUX" menu item is displayed
on the respective display with the associated menus broken down as follows:

-

Status bar:
-

No display

-

Application bar:
-

"Disk", "TV" (with code (863) Digital/analog TV tuner), "AUX" and "System"

-

Application field:
-

Scaled down video image and "Full screen" menu

-

Function bar:
-

"Selected source" (e.g. display AUX), "Source", "Treble" and "Bass"

Audio/Navigation Sys. - Volume In AUX Menu Is Too Low|Page 9211 > < Audio/Navigation Sys. - Volume In AUX Menu Is Too Low|Page 9209