GL 350 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2010)
/v6-3.0l_dsl_turbo_(642.820)/Page-2238024.png)
24
2 and nuts M10.
17. Screw on crossmember on right rear center section finger tight, to torque value, using microencapsulated bolts M10 x 30 (9) with shims 10.5 x 20
x 2 and nuts M10.
18. Screw on right longitudinal member reinforcement (6) to torque value using two self-locking bolts M10 x 40 (12) with shims 10.5 x 25 x 2 (13)
onto the vehicle longitudinal member.
If necessary, place wiring harness (22) to one side.
