GL 350 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2010)
/v6-3.0l_dsl_turbo_(642.820)/Page-2251016.png)
10
Attach the holders (arrows A) included in the package contents for the wiring harness for the LED lamps (3) corresponding to the previously made
marks next to the LED lamps (2) on the running boards (1).
The contact surfaces on the running boards (1) for the holders (arrows A) must be free of dust and grease.
11
Connect the black 2-pin connectors of the LED lamps (2) with the black 2-pin couplings of the wiring harness for the LED lamps (3).
The black 2-pin connector (14) of the wiring harness for the LED lamps (3) must be routed to the rear end of each running board (1).
12
Attach wiring harness for LED lamps (3) using cable ties to holders (arrows A).
AZ82.10-P-0015GZ Retrofit Lighting For Running Boards
AZ82.10-P-0015GZ Retrofit Lighting For Running Boards
- with CODE (846) Running boards
Component Identification
