mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
Seals and Gaskets, Engine > < AR09.41-P-1310GZB Remove/Install Charge Air Manifold|Page 2866

GL 350 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2010)

Page 1
background image

Intake Manifold: Service and Repair
AR09.41-P-1310-01PI Bolt Diagram For Charge Air Distribution Pipe

AR09.41-P-1310-01PI Bolt Diagram For Charge Air Distribution Pipe

Charge Air Pipe/Charge Air Cooling

1

Attach charge air distribution pipe firmly according to the bolt plan and tightening torque [Nm].

2

Tighten bolt (1) and bolt (11) again to the tightening torque [Nm]

Seals and Gaskets, Engine > < AR09.41-P-1310GZB Remove/Install Charge Air Manifold|Page 2866