GL 350 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2010)
Component Identification
1
Connect the hollow cylinder with the hydraulic hose to the hand pump
2
Insert hollow cylinder in the extraction and installation tool install extraction and installation on the steering knuckle.
3
Press supporting joint (7) out of the steering knuckle
Install
Component Identification
4
Insert supporting joint (7) and mount locking slotted nut (7j)
5
Pull in supporting joint (7) using claw-type wrench (044) until it lies flush against steering knuckle.
The locking slotted nut (7j) must be replaced after being used once.