GL 450 (164.871) V8-4.6L (273.923) (2007)
6
Insert the DVD player (18) into the cutout made from the footwell and fasten with two sheet metal screws (21).
7
Check whether weld nuts are attached to the body (see arrows).
8
If no weld nuts are attached, attach one sheet metal nut each at left and right of DVD player (18).
Type 164.1
9
Fasten cross strut (23) to DVD player (18) with two self-tapping sheet metal screws (24).
Type 164.1
10
Fasten cross strut (23) to body with two sheet metal screws (21).
If weld nuts are already provided, the cross strut (23) must not be attached using the sheet metal screws (21), instead the two enclosed metric
screws should be used.