GL 450 (164.871) V8-4.6L (273.923) (2007)
accordingly (e.g. seals, gaskets or bolts and screws as required).
Note:
When preparing / cleaning any surfaces for resealing, extreme care must be taken not to damage surfaces with sharp tools. It is absolutely not permissible
to use any abrasive materials (i.e. sand paper, abrasive pads, etc.) for cleaning resalable surfaces. Proper application of sealant is a must as excessive
sealant can result in damage to the engine (refer to MTC listed in the note above). Failure to follow these precautions could result in severe and
permanent engine damage.
Special Tools
Note:
Always refer to EPC for the latest parts information and use the correct VIN number when specifying parts.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on June
17, 2009 Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.