GLK 350 4MATIC (204.987) V6-3.5L (272.971) (2010)
^
Direct lines
^
Telematics CAN (CAN A)
Direct lines
The following signals are received via direct lines:
-
Analog audio/video signals from external audio or video units via the AUX jack
-
Analog picture signals from the COMAND controller unit (A40/3) (with code (527) COMAND APS with single DVD drive (with navigation) or
code (512) COMAND APS incl. DVD changer or code (528) COMAND incl. DVD changer) via the Y brightness (luminance)/C color
information (chrominance) (Y/C) line
-
Analog audio signals from the COMAND controller unit via the stereo line
Telematics CAN
The DVD player is a station on the telematics CAN and communicates with the following components:
-
Radio (A2) (with code (523) Radio MB Audio 20 or code (510) Audio 20 incl. CD changer)
-
Radio with Auto-Pilot system (A2/56) (with code (525) Radio MB Audio 50 APS or code (511) Audio 50 APS incl. DVD changer)
-
COMAND controller unit (with code (527) COMAND APS with single DVD drive (with navigation) or code (512) COMAND APS incl. DVD
changer or code (528) COMAND incl. DVD changer)
-
Left rear display (A40/5)
-
Right rear display (A40/6)
Decoding of signals
The DVD player decodes the received analog/digital audio and video signals into analog audio and video signals.
Transmitting signals
The signals are transmitted via the following connections:
^
Direct lines
^
Telematics CAN
Direct lines
The following signals are sent via direct lines:
-
Analog audio signals to the active rear display via the stereo line
-
Analog picture signals to the active rear display via the Y/C line
-
Analog audio signals to the COMAND controller unit for audio output over the speaker system
Telematics CAN
The DVD player is a station on the telematics CAN and communicates with the following components:
-
Radio or
-
Radio with auto pilot system or
-
COMAND controller unit
-
Left rear display
-
Right rear display