mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Body and Frame|Unibody > < BT32.25-P-0001-01CW Cap For Front Suspension Strut Modified
Page 1
background image

Strut / Shock Tower: Service and Repair
BT32.25-P-0002-01CW Bolt, Suspension Strut to Suspension Strut Tower Modified

BT32.25-P-0002-01CW Bolt, suspension strut to suspension strut tower modified

Component Identification

The bolt has been modified because of the improvement measures to the bolted connection for the suspension strut to the suspension strut tower.

The new bolt can be recognized by its larger collar diameter.

A new coating on the bolt means that the tightening torque is also lower now.

If the suspension strut has been released on the suspension strut tower, the bolt has to be replaced (only when the old version was installed).

Only the new version is sent out as a replacement part.

Body and Frame|Unibody > < BT32.25-P-0001-01CW Cap For Front Suspension Strut Modified