mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF54.21-P-6030CE Rear SAM Control Unit With Fuse and Relay Module, Component Description|Page 418 > < GF54.21-P-6030CE Rear SAM Control Unit With Fuse and Relay Module, Component Description
Page 2
background image

-

Left rear door rotary tumbler switch (A85/3s1)

-

Right rear door rotary tumbler switch (A85/4s1)

-

Left fuel level indicator sensor (B4/1)

-

Right fuel level indicator sensor (B4/2)

-

Trunk lid rotary tumbler switch (M14/7s1) (model 204.0)

-

Liftgate rotary tumbler switch (M14/7s1) (model 204.2/9)

-

Left rear backrest inclination switch (S54/5)

-

Right rear backrest inclination switch (S54/6)

-

Left rear backrest lock switch (S54/7)

-

Right rear backrest lock switch (S54/8)

-

Engine hood antitheft alarm system switch (S62) (with code (551) Antitheft alarm system (ATA [EDW]))

-

with code (889) Keyless-Go:
-

KEYLESS-GO trunk lid button (S62/21) (model 204.0)

-

Liftgate KEYLESS-GO button (S62/21) (model 204.2/9)

-

Left rear seat belt buckle switch (S68/5)

-

Right rear seat belt buckle switch (S68/6)

-

Center rear seat belt buckle switch (S68/14)

-

Trunk lid contact switch (S88/6) (with model 204.0 with code (887) Valet parking)

-

Trunk lid emergency opening switch (S88/10) (with code (494) USA version)

-

Trunk lid external operation switch (S88/8) (model 204.0)

-

Liftgate external operation switch (S88/8) (model 204.2/9)

LIN

The following sensors are read in over LIN:

-

Battery sensor (B95) over the on-board electrical system (LIN B7)

-

Alarm siren (H3/1) (up to 31.5.10) via the rear SAM LIN B4) (with code (551) Antitheft alarm system (ATA [EDW]))

Interior CAN

The signals are read in by the rear SAM control unit over the interior CAN.
The functions resulting therefrom are described in the corresponding function descriptions (see block diagram or function schematic).

Evaluation of input factors

The input factors are evaluated by the integrated microprocessor and the relevant systems or components are then actuated.

Control of systems

The rear SAM control unit controls the following functions and systems:

-

Battery state recognition

-

Exterior lights (ABL) for vehicle rear

-

Rear window defroster

-

Trunk lid lock (model 204.0) or Liftgate (model 204.2/9) and fuel filler door

-

Heated seats (HS) (with code (873) front left and right heated seats)

-

Electric rear window roller blind (with model 204.0 with code (540) Roller sun blind)

-

Antitheft alarm system (ATA [EDW]) (with code (551) Antitheft alarm system (ATA [EDW]))

Actuation of components

Actuation of the components takes place via the following connections:

^

Direct line

^

LIN

^

Interior CAN

Direct line

The following components are actuated via a direct line:

-

Left rear lamp unit (E3)

-

Right rear lamp unit (E4)

-

Model 204.0/2, model 204.9 with code (460) Canada version or code (494) USA version:
-

Left rear side marker lamp (E6/3)

-

Right rear side marker lamp (E6/4)

-

Right luggage compartment lamp (E18/4)

GF54.21-P-6030CE Rear SAM Control Unit With Fuse and Relay Module, Component Description|Page 418 > < GF54.21-P-6030CE Rear SAM Control Unit With Fuse and Relay Module, Component Description