mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF54.21-P-6030CE Rear SAM Control Unit With Fuse and Relay Module, Component Description|Page 422 > < GF54.21-P-6030CE Rear SAM Control Unit With Fuse and Relay Module, Component Description|Page 420
Page 3
background image

The communication with the processor responsible for controlling the central gateway functions can also send the data read in by the processor
responsible for controlling the basic functions to control units that are not connected to the interior CAN.

CAN

The processor responsible for controlling the basic functions reads in function-relevant data over the interior CAN.
Information from control units that are not connected to the interior CAN are sent by the processor responsible for controlling the central gateway
functions over the interior CAN. This can be information from control units, which are connected to one of the following CANs:

-

Chassis CAN

-

Front end CAN

-

Diagnostic CAN

The functions resulting therefrom are described in the corresponding function descriptions (see block diagram or function schematic).

Evaluation of input factors

The input factors are evaluated by the processor responsible for controlling the basic functions whereupon the corresponding components are then
actuated.

Control of systems

The processor responsible for controlling the basic functions manages the following systems:

-

ABL

-

Interior illumination (IBL)

-

Wiper system (WSA)

-

Windshield washer heater (with code (875) Heated windscreen washing system)

-

Headlamp cleaning system (with code (600) Headlamp cleaning system)

-

Central locking (CL) for rear doors, crash opening (up to 30.11.09)

-

Rain closing of tilting/sliding roof (SHD) (with code (414) Power glass tilting/sliding sunroof and code (345) rain sensor)

Component actuation

Components are actuated via the following lines:

^

Direct line

^

Instrument panel LIN

^

Wiper/inside rearview mirror LIN

Direct line

The following components are actuated over a direct line by the processor responsible for controlling the basic functions:

-

Refrigerant compressor (A9)

-

Left rear door lock (A85/3) (up to 30.11.09)

-

Right rear door lock (A85/4) (up to 30.11.09)

-

Left front lamp unit (E1)

-

Right front lamp unit (E2)

-

Vehicles as of 1.12.09 with code (621) Intelligent Light System (left-hand traffic) or code (622) Intelligent Light System (right-hand traffic) and
without code (498) Japan version:
-

Left daytime running lights headlamp (E1/3)

-

Right daytime running lights headlamp (E2/3)

-

Vehicles up to 30.11.09 and as of 1.12.09 without code (621) Intelligent light system (left-hand traffic) and without code (622) Intelligent light
system (right -hand traffic) or with code (498) Japan version:
-

Left fog lamp (E5/1)

-

Right fog lamp (E5/2)

-

With code (494) Canada version or code (460) USA version
-

Left front side-marker lamp (E6/1)

-

Right front side-marker lamp (E6/2)

-

With code (954) Avantgarde or code (955) Elegance
-

Left center air vent symbol illumination (E10/1)

-

Left front side air vent symbol illumination (E10/2)

-

Right front side air vent symbol illumination (E10/3)

-

Right center air vent symbol illumination (E10/4)

-

Rear vent symbol illumination (E10/5)

GF54.21-P-6030CE Rear SAM Control Unit With Fuse and Relay Module, Component Description|Page 422 > < GF54.21-P-6030CE Rear SAM Control Unit With Fuse and Relay Module, Component Description|Page 420