GLK 350 4MATIC (204.987) V6-3.5L (272.971) (2010)
Fluid Line/Hose: Service and Repair
AR27.10-P-0501-03CW Separate/connect transmission oil line
- TRANSMISSION 722.6 in MODEL 204.0, 207, 212
- TRANSMISSION 722.9 in MODEL 204.0/9, 207, 212
Special Tools
Component Identification
Remove retaining clamp on connector
Before opening the hydraulic system the area surrounding the separation point should be cleaned thoroughly. Even minute particles of dirt in the
hydraulic components can result in malfunctions and total failure of the hydraulic system.
1
Detach dust cap (3) and push back along the transmission oil line (1) until the connector (2) is accessible.
2
Position a suitable tool (e.g. hook) at one end of the retaining clamp (2a) and pull the retaining clamp (2a) off the connector (2).
3
Pull transmission oil line (1) out of connector (2).
Seal off line connections using plugs.
4
Detach dust cap (3) from transmission oil line (1).