GLK 350 4MATIC (204.987) V6-3.5L (272.971) (2010)
/v6-3.5l_(272.971)/Page-902001.png)
Center Support: Removal and Replacement
AR41.10-P-0100-02TX Press grooved ball bearing out of rubber mount of propeller shaft, press in
Special Tools
Component Identification
Press out
1
Use the removal and installation tool (04a, 04b) to press the grooved ball bearing (8) out of the rubber mount (7b).
Component Identification
Pressing in
2
Press grooved ball bearing (8) into the rubberized bearing seat up to the contact surface (arrows) using press out/in tool (04a, 04b).
Pay attention to correct seat of grooved ball bearing (8).
