GLK 350 4MATIC (204.987) V6-3.5L (272.971) (2010)
21
Slowly wrap cutting wire (17) onto coil of windlass (16) and cut out window up to marking (D).
22
Move windlass (16) to next position.
23
Slowly wrap cutting wire (17) onto coil of windlass (16) and cut out window up to marking (E).
24
Move windlass (15) to next position.
25
Slowly wrap cutting wire (17) onto coil of windlass (15) and cut out window up to marking (E).
Secure window against falling down to prevent damage.
26
Remove windlasses (15, 16) from window.
27
Fasten cup suction tool at outside of window and remove window from body flange.
Cup suction tool
Aid of helper required.
AR67.10-P-1000-12SX Prepare 1-Component Adhesive Cartridge
AR67.10-P-1000-12SX Prepare 1-Component Adhesive Cartridge
Special Tools
Repair Materials
1. Remove cartridge from 1-component repair kit and heat in cartridge preheater.
Cartridge heater.
Heating time is approx. 60 minutes.
2. Screw on application nozzle onto cartridge.
3. Insert cartridge into cartridge gun.
Cartridge gun.
The adhesive material can be easily pressed out using a commercially available electric (battery-powered) or pneumatic cartridge gun with piston
rod. Use adapter to completely press out cartridge. Insert adapter between cartridge piston and plate on cartridge gun push rod.
AR67.10-P-1000CW Remove/Install Windshield
AR67.10-P-1000CW Remove/install Windshield