GLK 350 4MATIC (204.987) V6-3.5L (272.971) (2010)
/v6-3.5l_(272.971)/Page-1937008.png)
Repair Materials
AR67.10-P-1501-01P Prepare Body Flange For Installation Of Window
AR67.10-P-1501-01P Prepare Body Flange For Installation Of Window
Repair Materials
Component Identification
The bonding area (2) on the body flange (1) must be absolutely free of dust and grease. Apply primer filler only on body flange (1) in entire bonding area
(2) when repairing damage to prevent adhesion problems when installing window. The primer stick can be used if damage is <10 %, if damage is >10 %
coat body flange (1) with 2- component primer filler.
Observe the manufacturer's specifications for the curing and processing time of the primer filler.
1. Cut off residual adhesive material on body flange (1) down to a height of approx. 2 mm using suitable scraper.
2. Remove adhesive material residues.
3. Clean adhesive surface on body flange (1) with cleaner from repair kit and rub dry with rag.
4. Repair paint damage in bonding area (2) and on body flange (1) with primer stick or 2-component primer filler.
5. Apply primer from repair kit in areas where residual adhesive material on body flange (1) is missing or damaged.
Allow primer to flash off for at least 10 minutes.
6. Clean working area with wet/dry vacuum cleaner. Wet and dry vacuum cleaner.
AH67.10-P-1000-01P Notes on Removal/Installation of Windshield
AH67.10-P-1000-01P Notes On Removal/Installation Of Windshield
^
Allow primer to air dry for 10 min. to avoid negative effects to the adhesive action of the glue.
^
The crank window in the driver door must be opened during the curing time to prevent the windshield from being pressed out by the air when the
doors are closed.
^
Install windshield on body flange within 10 minutes before adhesive force of glue starts to decrease.
^
Drive-away time for 2-component repair kit is 1 h.
^
Drive-away time for 1-component repair kit is 2 h.
^
The gluing area on the body flange must be absolutely free of dust and grease to prevent a decrease in the gluing force when installing window.
