ML 320 (163.154) V6-3.2L (112.942) (1998)
For an overview of the valid symbols used see Section 0.
The symbol indicates a new section.
When a wire is listed in the "possible cause/Remedy" column, all connectors "between the control unit and the component being tested are to be included
as as possible failure source.
NOTE: When using the 126 socket Socket Box Tester, see the appropriate wiring diagram at the end of the test program
Function Test - Section 11
Explanation to Function Test
For the function test adjust the radio as follows:
Select a strong radio station (music) or play a cassette or CD.
Set fader, bass, treble and balance to the center position 0 (RESET or CENTER in display window).
NOTE: Local and atmospheric conditions must be taken into consideration for a interference free and good radio reception.
Component Locations - Section 21