ML 320 (163.154) V6-3.2L (112.942) (1998)
![background image](/mercedesbenz/ml_320_(163.154)/v6-3.2l_(112.942)/Page-3345015.png)
GF54.50-P-4100-01GH Trip Computer Control Module, Task
GF54.50-P-4100-01GH Trip Computer Control Module, Task
-
with CODE (245) Trip computer
The trip compute control module (TRIP, N41) has the following tasks:
-
Display and calculate the current and average fuel consumption
-
Display and calculate the likely range
-
Display the trip time
-
Display the date
-
as of 1.9.00: Display the route (compass)
On vehicles with ATA also to:
-
Display the status of the ATA sensory system (on/OFF)
-
Output a "life sign" on the alarm bus to the all activity module (AAM, N10)
-
Output an alarm signal on the alarm bus to the all activity module (AAM, N10) when the glass breakage sensor (N41b2) is triggered
-
Output an alarm signal on the alarm bus to the all activity module (AAM, N10) when the inclination sensor (N41b2) is triggered
GF54.50-P-4100-02GH Trip Computer Control Module, Design
GF54.50-P-4100-02GH Trip Computer Control Module, Design
-
with CODE (245) Trip computer
The trip computer control module (TRIP, N41) consists of the following components:
-
Electronics unit
-
LCD display
-
Reset button (left button, N41s1)
-
Mode button (right button, N41s2)
-
Inclination sensor (N41b1)
-
Glass breakage sensor (N41b2)
-
CAN interface
-
Alarm bus to all activity module (AAM, N10)
-
as of 1.9.00: Interface (RS 485) to electronic compass (B26)