ML 320 (163.154) V6-3.2L (112.942) (1998)
Oil Level Sensor: Service and Repair
Remove/Install Oil Level Sensor
Shown On Engine 112
DANGER:
-
Risk of death, Death may result if vehicle slips or topples from the lifting platform.
-
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by
the vehicle manufacturer.
1
Evacuate engine oil, drain
2
Remove lower part of oil pan (1)
3
Unplug connector (3) at oil level sensor
4
Unscrew bolts of oil level sensor (2)
5
Remove oil level switch (S43)
6
Install in the reverse order.