ML 320 (163.154) V6-3.2L (112.942) (1998)
Component Illustration
Function of R lock
Lock position
Component Illustration
Function of P lock
Lock position
Location
The R/P lock is located in the floor shift.
Task
Depending on the preconditions, the R/P lock prevents a shift away from selector [ever position "P" or a shift to the selector lever position "R" from
"N".
Design
The R/P lock consists of
The locking disc (69) for the R/P lock and shift detent which is rigidly connected to the selector lever
The lock lever of the R/P lock (90)
The R/P locking magnet (89)
Function of R lock
At driving speeds in excess of approx. 10 km/h the P/R locking magnet (89) is actuated by the electronic selector lever module control module
(N15/5). The R/P lock lever (90) is turned to the lock position (shift from "N" to "R").
The tab on the lock lever (R lock) (90c) locks the locking disc for the R/P lock and shift detent (69) against the cam (R lock) (69c). The selector lever
(80) cannot be moved to the "R" position.
Function of P lock