ML 350 (163.157) V6-3.7L (112.970) (2004)
Headlamp Control Module: Service and Repair
Remove/Install Xenon Headlamp Control Module
- 163.154/174 #A as of 289565
Remove/Install
Danger:
-
Danger from Xenon headlamp high voltage
-
Do not touch parts which conduct high voltages. Persons with active electronic implants (e.g. heart pacemakers) should never work on
xenon headlamps.
1
Remove left front headlamp unit (E1) or right front headlamp unit
2
Place headlamp in inverted position on workbench
CAUTION: Place on a soft base so that the headlamp lens is not scratched.
3
Unscrew screws (1)
NOTE: 3 each.
4
Remove Xenon headlamp control module
NOTE: is unplugged automatically when removed.
5
Install in the reverse order
6
Adjust headlamp into zero position using STAR DIAGNOSIS
7
Inspect headlamp adjustment, correct if necessary.