ML 430 (163.172) V8-4.3L (113.942) (2000)
GF54.50-P-2001GH Display Behavior When Switching on, Function
GF54.50-P-2001GH Display Behavior When Switching On, Function
-
with CODE (245) Trip computer
Once terminal 15R is switched on (from starter switch (S2) in position "1"), all segments are actuated for approx. 1 second on the display of the trip
computer control module (RRE, N41).
GF54.50-P-2002GH Kilometer/Miles Switchover, Function
GF54.50-P-2002GH Kilometer/Miles Switchover, Function
-
with CODE (245) Trip computer
The information on the trip computer control module (TRIP, N41) can be displayed in either kilometers or miles.
The driver can switch the display of the trip computer control module (TRIP, N41) from kilometers to miles or vice versa as described below.
-
Press the Mode button until only the "km" or "mi" symbol appears,
-
Press the Reset button. The trip computer now switches to the other measuring system.
-
Press the Mode button until the desired mode is displayed.
The setting is always changed for all functions.
GF54.50-P-2003GH Date, Function
GF54.50-P-2003GH Date, Function
-
with CODE (245) Trip computer
Date
The date is displayed
-
in the order "MONTH.DAY" with the miles setting, and
-
in the order "DAY.MONTH" with the kilometers setting.
The trip computer control module (TRIP, N41) receives a synchronization pulse via the engine compartment CAN to switch the display to the next day
each time the date changes on the electronic clock (A1p6) which is integrated in the instrument cluster (A1). The clock in the instrument cluster must
therefore be set to the correct time to ensure that the correct date is displayed.
The correct year must also be set to ensure that leap years are taken into account.