ML 430 (163.172) V8-4.3L (113.942) (2000)
^ If necessary, loosen bolt (2, Figure 3) securing windshield washer reservoir (1) in order to gain access to brake line (do not remove washer reservoir).
^ When installing new brake line (arrow, Figure 2), "start" brake line (arrow) into hydraulic unit (threaded bore) first.
2. Bleed brake system; refer to WIS: AR42.10-P-0010GH.
3. Wrap fabric tape around area of fuel line rubber sheath (C, Figure 1) where it contacted the brake line.
Note:
^ Do NOT replace fuel line (C, Figure 1) if rubber sheath is damaged (chafed)
^ Proceed to step 4.