ML 430 (163.172) V8-4.3L (113.942) (2000)
Headlamp Control Module: Service and Repair
Remove/Install Xenon Headlamp Control Module
- with CODE (612b) Xenon headlamp unit
- 163.154/174 #A up to 289564
Remove/Install
Danger:
-
Danger from Xenon headlamp high voltage
-
Do not touch parts which conduct high voltages. Persons with active electronic implants (e.g. heart pacemakers) should never work on
xenon headlamps.
1
Remove left front headlamp unit (E1) or right front headlamp unit (E2)
2
Remove cover from rear of headlamp unit
3
Disconnect plug (1, 2) on Xenon headlamp control module (E1n1, E2n1)
NOTE: Turn connector (2) %U turn counterclockwise.
4
Remove xenon headlamp control module (E1n1, E2n1)
NOTE: Carefully press control module off of mount using long wedge
-
Installation wedge: See Special Tools below.
5
Install in the reverse order
6
Adjust headlamp into zero position using STAR DIAGNOSIS
7
Inspect headlamp adjustment, correct if necessary.
Special Tools