ML 430 (163.172) V8-4.3L (113.942) (2000)
^
Remove 6 nuts (arrows Figure 8), remove cross member (1).
2.
Remove front springs WIS:
AR32.20-P-0200GH.
Notes to the above WIS instructions:
^
When removing the torsion bars it is not necessary to perform the following steps in the WIS instructions: 4, 7, 8, and 11.
^
Step 5: Spray the inside of the torsion bar sleeve with penetrating oil (helps reduce binding when sliding sleeve over torsion bar)
^
When reinstalling torsion bars, make sure to set proper spring preload (step 2) or ride height will be incorrect.