ML 450 (164.195) V6-3.5L (272.973) Hybrid (2010)
These operating instructions consist of the following subfunctions:
^
Base function, 6-disk DVD changer, with code (528) COMAND with DVD changer or with code (512) COMAND APS with DVD changer
^
Base function, audio
^
Base function, TV, with code (863) Digital/analog TV tuner
^
Base function, video
^
Base function, navigation, with code (527) COMAND APS with single DVD drive (with navigation) or code (512) COMAND APS with DVD
changer
^
Basic telephony function
^
Actuation of audio signals (sound settings)
^
System settings
Base function, 6-disk DVD changer, with code (528) COMAND with DVD changer or with code (512) COMAND APS with DVD changer
If the "CD/DVD eject and load button" is pressed, the default screen appears.
Control within the menu is possible either with the cross-shaped rocker button or with the number pad on the COMAND controller unit.
Selection possibilities in menu
-
"Back"
-
Previous menu is called up
-
"Eject all"
-
All inserted CDs or DVDs are automatically ejected one after the other
-
"Fill empty locations"
-
Magazine can be filled
CDs or DVDs which are ejected but not removed are automatically pulled back in after expiration of a certain time.
Base function, audio
If the audio base function is activated, the audio application last performed is started. If another audio application is to be started, then a change must be
made in the menu bar and the Audio menu item selected. The following differences are present for the specific countries:
^
Audio base function, except code (494) USA version
^
Audio base function, with code (494) USA version
Audio base function, except code (494) USA version
The following audio sources can be selected in the menu item Audio:
^
Radio ((FM, AM (MW and, depending on country, LW or SW))
^
Digital Audio Broadcasting (digital radio) (DAB) operation, with code (537) Digital radio
^
Disk
^
Memory card
^
MUSIC REGISTER
^
Media interface, with code (518) Media interface
^
AUX
Media containing MP3 data can also be played (detected automatically).
Radio ((FM, AM (MW and, depending on country, LW or SW))
If the "Radio" menu item is activated, the default screen appears.
The following appears on the display:
-
The current stations and the numbers of their memory locations ("station name" with radio data system (RDS))
-
Cursor for selecting station
Selection or settings via function bar:
-
"Radio"
-
"Station list", "Frequency entry", "Fixed frequency", "Traffic Announcement (TA)"
-
"Memory"
-
List of stored stations, auto memory for automatic search and storage of 10 stations with best reception
-
"FM"
-
Frequency band selection (FM, MW and, depending on country LW or SW)
-
"Sound"
-
Configuration of audio output
The selections or settings are made using the control buttons of the COMAND controller unit or via the voice control of the VCS (with code (527)
COMAND APS (with navigation) or with code (512) COMAND APS with DVD changer).