ML 450 (164.195) V6-3.5L (272.973) Hybrid (2010)
7. Fasten bottom right and left underride guard (4) in front paneling (1) with one expansion rivet each (12).
8. Fasten basic carrier (6) in front paneling (1) with four lock nuts (14).
9. Install HCS [SRA] cover (15) with left and right HCS [SRA] spring (16) in front paneling (1).
For this purpose, pull bearing bracket on HCS [SRA] cover (15) apart and insert into bearing bores. Then close HCS [SRA] cover (15) and insert
HCS [SRA] spring (16).
10. Install sheet metal nuts (17) for fastening right and left front fog lamps (8 each).
11. Insert left front fog lamp (E5/1) and right front fog lamp (E5/2) from front into front paneling (1) and fasten with four 4.2x19 round Allen head
bolts (18).
The front fog lamps are marked on the corresponding side. The adjustment screws (20) should point downward.
12. Insert front fog lamp cover (19) on right and left from front into front paneling (1) and arrest.
The catch tabs on the front fog lamps covers (19) must catch properly in the front paneling (1).