ML 500 (163.175) V8-5.0L (113.965) (2003)
Carpet: Service and Repair
AR68.20-P-2040GH Remove/Install Floor Covering
AR68.20-P-2040GH Remove/Install Floor Covering
Remove/Install
1
Remove front seats
2
Remove bass module speaker
NOTE: Only with Sound-System, Code 810.
3
Remove control module for emergency call system
NOTE: Only with emergency call system E-Call, Code 349.
4
Remove bench
5
Remove rear seat anchors (2)
NOTE: Up to 31.8.99, unscrew internal Torx drive bolts (3).
-
Torx bit set : See Special Tools below.
6
Remove center console (4)
7
Remove cover below instrument panel on left (6)
8
Remove cover below instrument panel on right (5)
9
Unscrew plastic nuts (11) in right footwell
10
Remove condensate water drain hose from heater housing
11
Remove door sill molding on right (9) and door sill molding on left (10)
12
Remove paneling in footwell on right (7) and paneling in footwell on left (8)
13
Remove insulating mat under the center console
14
Remove air duct for ventilation in the rear
15
Remove radio
16
Disconnect all the electrical connectors and lay aside
17
Detach shift-lock cable at the electronic selector module
18
Remove bracket between instrument panel center part and transmission tunnel