ML 55 AMG (163.174) V8-5.5L (113.981) (2001)
Component Identification
Garage door opener, function
The garage door opener consists of an adaptive radio remote control with three transmit buttons. With these three buttons: Button 1 garage door opener
(A67s1), button 2 garage door opener (A67s2) or button 3 garage door opener (A67s3) it is possible to activate various receivers for the opening and
closing system of the doors and gates.
Program remote control
Function requirements:
-
Circuit 15R or circuit 15 ON
-
Press and hold down button 1 garage door opener (A67s1), button 2 garage door opener (A67s2) or button 3 garage door opener (A67s3).
-
The garage door opener indicator lamp (A67e4) starts flashing (1 Hz frequency).
-
Continue to hold button 1 garage door opener (A67s1), button 2 garage door opener (A67s2) or button 3 garage door opener (A67s3)and hold
garage door opener remote control with transmit button pressed for t < 90 s.
After successful programming the garage door opener indicator lamp (A67e4) flashes rapidly (f = 5.5 Hz) for a duration of approx. 10 s.
-
Release the two transmit buttons and program additional transmitters as required.
Time switch-off
In order to save the vehicle battery, the transmitter switches off automatically in the learn-in mode, if programming is not accomplished after approx. 100
seconds.
Transmitter mode
If button 1 garage door opener (A67s1), button 2 garage door opener (A67s2) or button 3 garage door opener (A67s3) is actuated, the signal learned in
for this memory space is transmitted activating the associated garage door drive.
The garage door opener signal has a range of at least 15 m.
Erasing
-
C. 15 R or c. 15 ON.
-
Press button 1 of garage door opener (A67s1) and button 3 of garage door opener (A67s3) simultaneously for approx. 20 s. The garage door
opener indicator lamp (A67e4) starts flashing.
-
Release button 1 on garage door opener (A67s1) and button 3 on garage door opener (A67s3) when garage door opener indicator lamp (A67e4) is
flashing within 10 s after it starts flashing. The existing data of the memory locations is erased.
The memories are erased by actuating the button 1 garage door opener (A67s1) and button 3 garage door opener (A67s3) for longer than 20 ms.
Successful erasure of all memory locations is indicated for approx. 10 s by the LED flashing rapidly.