mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF82.64-P-3113-02GH CD Player With Changer, Function|Page 11242 > < GF82.64-P-3113-02GH CD Player With Changer, Function
Page 1
background image

CD Changer: Description and Operation
GF82.64-P-3113-02GI CD Player With Changer, Function

GF82.64-P-3113-02GI CD player with changer, function

-

with CODE (522) Modular control system (MCS) radio USA

-

with CODE (357) Navigation system - additional unit

-

with CODE (818b) Single CD player - additional unit

-

with CODE (819) 6-disk CD changer in trunk

-

with CODE (491) U.S. version

Controlling CD player

The CD player with changer (in trunk) (A2/6) is controlled by the radio and navigation module (A2/56) via the digital data bus (D2B).

The CD player generates reports on the following operating conditions:

-

No magazine in CD changer

-

Magazine assignment (only with music CD)

-

Number of current CD

-

Number of current title

-

List of occupied slots (CDs)

-

Title number per disc

-

Current operating state (acoustic playback of radio signals, pause, etc.)

The messages are stored on the digital data bus D2B) and interpreted by the radio and navigation module (A2/56).

CD playback

The audio data is stored digitally on the CD-ROM.The audio CD is driven by a motor in the CD-player with changer (in trunk) (A2/6) . The laser-optical
device scans the non-labeled side of the rotating CD without making contact and converts the digital optical signals into electrical signals.Small
interruptions in the data flow of the laser optics caused by scratches or contamination on the audio CD are compensated by the D/A converter
supplementing the missing values.

The electrical signals are then decoded in the CD player with changer (in trunk) (A2/6) and transmitted via the digital data bus ( D2B) to the radio and 
navigation module (A2/56) via the audio signal processing or when the sound amplifier (A2/13) (code 810) is installed to the loudspeakers.

Jumps and interruptions during playback

On bad roads or in the event of heavy vibrations , jumps and interruptions can occur during playback. In such cases do not start CD mode until better
road conditions are present.

In the event of wet weather conditions and strong deviations in the ambient temperatures moisture can collect in the CD player housing (condensation
formation). This could also lead to malfunctions in the playback.In such cases provide for sufficient ventilation of the CD player and the trunk.

GF82.64-P-3113-02GH CD Player With Changer, Function|Page 11242 > < GF82.64-P-3113-02GH CD Player With Changer, Function