ML 63 AMG (164.177) V8-6.3L (156.980) (2007)
/v8-6.3l_(156.980)/Page-3059044.png)
^
Wake-up
^
TV RF (from TV antenna selector)
^
RF IN for Vehicle Information and Communication System (VICS) of VICS antenna splitter (A28/10)
^
GPS antenna signal from roof antenna module
^
Vehicle speed signal from ESP control unit (N47-5)
^
AUX jack for audio (analog)
^
Camera V (video input from backup camera control unit, code (218) Backup camera)
Discrete outputs
^
Remote antennas (for TV rear window antenna amplifier)
^
TV antenna selector
^
Control line for external fan (trigger signal)
MOST signals
Control, data and audio signals from and to:
^
CD changer
^
Microphone array control unit
^
Amplifier for sound system
^
Audio gateway control unit
^
COMAND operating, display and controller unit
RS-2 Bus
This serial bus is used to exchange data signals between the Electronic Toll Collection (ETC) control unit and the COMAND operating, display and
controller unit.
The interface for connection of the electronic toll collection (ETC) control unit is provided ex-factory. The dealer is responsible for adaptation into the
system.
AVC LAN Step 2
AVC-LAN Step 2-bus (Audio Video Connection Local Area Network) is used to transmit data signals for the dynamic destination-oriented navigation
system to the COMAND operating, display and controller unit.
The VICS control unit is connected to the COMAND operating, display and controller unit for this task.
The interface for connection of the VICS control unit is delivered ex-factory. The dealer is responsible for adaptation into the system.
DoCoMo bus
The DoCoMo bus is used to exchange control and data signals between the PDC portable CTEL connection (portable CTEL separation point) and the
COMAND operating, display and controller unit.
Backup camera
The vehicles are equipped with an assist system, which should assist the driver when maneuvering while backing up and parking. The backup camera
system (Dynamic Rear View Monitor) consists of the following components:
^
Backup camera (B84/3), which records the immediate surroundings of the rear end of the vehicle.
^
Passenger-side outside mirror backup camera (B84/6), with which the passenger side can be seen
^
Backup camera control unit as central processor unit.
The backup camera control unit directly forwards the camera pictures of the backup camera and of the passenger-side outside mirror backup camera via
a screened line to the COMAND operating, display and controller unit.
You can find a detailed description of the backup camera in the "Backup camera" system description.
GF82.85-P-3134GZU COMAND Operating, Display and Controller Unit, Component Description
GF82.85-P-3134GZU COMAND Operating, Display And Controller Unit, Component Description
- with CODE (530) COMAND APS USA (with navigation system)
- with CODE (494) USA version
- with CODE (528) HIGH Class USA
