ML 63 AMG (164.177) V8-6.3L (156.980) (2007)
Component Identification
23
Reinstall footwell trim (24).
24
Reinstall left B-pillar paneling (10).
Do not damage illuminated door sill wiring harness (2).
25
Route illuminated door sill wiring harness (2) in cutout made (see arrow) as shown in figure and install left illuminated door sill (25).
26
Lift floor covering (see arrow) and route illuminated door sill wiring harness (2) between cable duct and floor covering.
27
Route illuminated door sill wiring harness (2) between cable duct and floor covering to right A-pillar as shown in figure.
28
Connect illuminated door sill wiring harness (2) to inverter (5).
29
Use attached adhesive pad to secure inverter (5) to right A-pillar as shown in figure.
30
Connect plug (4) to coupling of right illuminated door sill and position connector between floor covering and cable duct.
31
Make cutout (26) in right B-pillar paneling (27) as per dimensions.
32
Deburr edges at cutout (26).