ML 63 AMG (164.177) V8-6.3L (156.980) (2007)
The sealant bead must not be spread. Only the approved sealing compound may be used.
Application of sealant to oil pan bottom section at front for engine with rear sump
Application of sealant to oil pan bottom section at front for engine with rear sump
The line (1) identifies the sealant run
The sealing surface must be cleaned. The sealing compound must only be applied to the specified surface in the form of a bead and a height and width
of 2.0 mm (± 0.5 mm).
The sealing compound must be applied within 10 min.
The sealant bead must not be spread. Only the approved sealing compound may be used.
AH01.45-P-0001-01GZ Notes on Application of Sealant to Oil Pan
AH01.45-P-0001-01GZ Notes on application of sealant to oil pan
Application of sealant on the oil pan top section
Application of sealant on the oil pan top section
The line drawn (F) identifies the course of application of sealant.
The sealant must only be applied to the specified surfaces in the form of a sealant bead 2.0 mm (± 0.5 mm) diameter.
The sealant must be applied within 10 min. The sealant bead must not be spread. Use only the approved sealant.