R 350 BLUETEC (251.125) V6-3.0L DSL Turbo (642.870) (2010)
Installation location: Right B-pillar
28
Attach double sided adhesive tape to rear of right front inverter (8) and right rear inverter (9).
29
Glue right front inverter (8) for the right front illuminated door sill as shown onto the right B-pillar.
The right front inverter (8) must lie on the floor covering (arrow).
30
Glue right rear inverter (9) for the right rear illuminated door sill as shown onto the right B-pillar.
The lower right corner of the right rear inverter (9) must lie on the edge of the panel (arrow).
Installation location: Right B-pillar
31
Fasten the inverter additionally with felt tape to the right B-pillar (arrow "A").
32
Connect black, 8-pin coupling (5) from wiring harness for illuminated door sills (2) to right front inverter (8).
The black, 8-pin coupling (5), which is at the end of the wiring harness for illuminated door sills (2) must be connected.