S 320 LWB (140.033) L6-3.2L (104.994) (1995)
Ashtray insert (2)
remove.
Screw (3) in ashtray housing
loosen with offset screwdriver.
Wood cover (4)
remove upward.
Screws (5 and 6)
screw out (Allen wrench WAF 4 mm, 2.5 Nm).
Cover (7)
press toward rear and lift at front. Then pry out cover toward front and up.
NOTE: Danger of damage, do not use sharp tools!
Plug connector on switch
disconnect.
Cover (7)
lay down.
Reinstall
in opposite order.
Removal and Installation
1
Press frame on selector lever console upward and out with plastic wedge
2
Open ashtray housing and remove ashtray insert.
3
Loosen screws (arrow) in ashtray housing with offset screwdriver.
4
Remove wooden cover (4) upward.