S 320 LWB (140.033) L6-3.2L (104.994) (1995)
/l6-3.2l_(104.994)/Page-536002.png)
5. Hold camshaft sprocket to flange and remove special tool (5, Figure 1).
6. Install cover (12, Figure 1) and nut (6, Figure 1) and torque to 65 Nm.
Special Tools
Figure 7
The shop-made special tool (5, Figure 1 and Figure 7).
Note:
Mild steel or aluminum are suggested as materials for the special tool. A washer of similar dimensions may be substituted for the shop-made special
tool.
