S 320 LWB (140.033) L6-3.2L (104.994) (1995)
Seat Belt: Service and Repair
Rear Seat Belts, Remove/Install
A. Sedans
Preliminary work:
Panelling on rear pillar removed.
Screw (1)
screw out.
Screw (2)
loosen.
Bolt (3) on automatic belt retractor (A)
screw out (35 Nm).
Automatic belt retractor (A)
remove from mount while pulling bolt out at bolt guide (B).
Screw (4) on belt end fitting
screw out (35 Nm).
Belt end fitting
remove through opening in rear pillar panelling.
Automatic belt retractor (A)
lay to side.
Screw (6) on automatic retractor for lap belt (C) or screw (5) on belt buckle (D and E)
screw out (35 Nm).
Automatic retractor for lap belt or belt buckle
remove.
When installing the automatic bolt retractor (A and C) as well as the belt buckles (D and E)
pay attention to correct installation position (catch) (arrows).