mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Campaign - Trunk Lid Lock Inspection/Replacement|Page 13972 > < Campaign - Trunk Lid Lock Inspection/Replacement|Page 13966
Page 1
background image

Trunk / Liftgate Lock: Recalls
Campaign - Trunk Lid Lock Inspection/Replacement

FILE:
SERVICE: GROUP 00 OF SERVICE INFORMATION BINDER
PARTS: GROUP I OF INFORMATION _ PARTS & ACCESSORIES BINDER

Campaign No. 2005060009 

July 2005

TO: ALL MERCEDES-BENZ CENTERS

SUBJECT:
MODEL 220, MODEL YEAR 2003

CHECK TRUNK LID LOCK AND REPLACE IF NECESSARY

This Service Campaign has been initiated because DCAG has determined that on the affected vehicles (see VIN range below) the button opening the
trunk lid supplies a resistance value not defined for the pneumatic control unit (PSE). This can result in the interior bus (CAN-B) being activated
continuously resulting in an increased battery drain. The resistance values of the trunk lid lock will be checked and replaced if necessary during this
Service Campaign.

Please review the Effective Serial Number chart shown and if necessary repair the subject vehicles during the vehicle's next service.

Prior to performing this Service Campaign:

^

Please check VMI to insure the vehicle is involved and to determine if the vehicle has been previously repaired.

^

Please review the entire Service Campaign bulletin.

Approximately 288 vehicles are affected.

PROCEDURE

Campaign - Trunk Lid Lock Inspection/Replacement|Page 13972 > < Campaign - Trunk Lid Lock Inspection/Replacement|Page 13966