S 500 4MATIC (220.184) V8-5.0L (113.966) (2003)
Door Module: Removal and Replacement
AR72.29-P-1000M Remove/Install Front Door Control Module
AR72.29-P-1000M Remove/Install Front Door Control Module
1
Press trim strip (1) out of door control module cover (2) off with assembly wedge (5)
-
See "Special Tools" below.
2
Remove door handle cover (3) from door handle
3
Unscrew door control module finisher (2) from door liner (4) and press off with using assembly wedge (5)
-
See "Special Tools" below.
4
Disconnect the connectors from left/right front door control module (N69/1, N69/2) and remove door control module cover (2)
5
Unclip left/right front door control module (N69/1, N69/2) from door control module cover (2)
CAUTION: For this purpose, press mounting clips on left/right driver-side front door control module (N69/1, N69/2) together with
suitable tool and simultaneously press left/right driver-side front door control module (N69/1, N69/2) off of door control module cover.
6
Install in reverse order.
Special Tools
Assembly Wedge P/N # 110 589 03 59 00
AR72.29-P-1100M Remove/Install Rear Door Control Module