S 500 4MATIC (220.184) V8-5.0L (113.966) (2003)
Remove/install
Danger:
-
Lethal injuries are possible if vehicle slips off of lifting platform
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
NOTE:
-
The vehicle must be horizontal
-
Park vehicle on two-/four-column lift platform or over inspection pit.
CAUTION: Installation: Replace self-locking nuts and bolts.
1
Move selector lever into position "R"
2
Turn key in electronic ignition lock EIS into position "O".
NOTE: Key cannot be withdrawn.
3.1 Remove shift rod
-
Model 230
3.2 Detach shift rod at intermediate lever
4.1 Remove cover at selector lever
-
Model 230
4.2 Remove center console
-
Model 215
-
Model 220
5
Remove air duct for center rear compartment air nozzle
-
Models 215, 220
NOTE: Not if rear air conditioning (code 582) fitted.
6
Unscrew bolts (41)
-
Model 230
7
Unscrew hexagon socket bolts (40)
NOTE: Model 230: Use hexagon socket wrench with ball head.
8
Disconnect electric couplings at electronic selector lever module (N15/5)